WELDING MACHINE NBC 250 GAS PROTECTION

WELDING MACHINE NBC 250 GAS PROTECTION 1.Continious or Intermittent Welding Capacity. 2.Build-in or Separate Wire Feeder...

I. INVERTER NBC SERIES MIG/MAG/CO2 GAS PROTECTION WELDING EQUIPMENT WITH CCC&CE APPROVED

 

     Model :NBC-200Y/250Y/250F

 

II.MAIN TECHNICAL PARAMETER

 

 

MODEL                   ITEM	MIG/NBC-200Y	MIG/NBC-250Y	MIG/NBC-250F
INPUT POWER VOLTAGE FREQUENCY(V,HZ)	AC380(THREE PHASES)±15%                                             50/60	AC380(THREE PHASES)±15%                                             50/60	AC380(THREE PHASES)±15%                                             50/60
RATED INPUT POWER CAPACITY (KWA)	6	8.3	8.3
OUTPUT CURRENT ADJUSTMENT RANGE (A)	50-200	50-250	50-250
OUTPUT VOLTAGE (V)	16.5-24	16.5-26.5	16.5-26.5
RATED DUTY CYCLE (%)	60	60	60
EFFICIENCY (%)	85	85	85
POWER FACTOR	0.93	0.93	0.93
INSULATION CLASS	F	F	F
TYPE OF WIRE FEEDER	INSIDE	INSIDE	OUTSIDE
OVERALL DIMENSION (MM)	655x295x610	655x295x610	655x295x610
PROTECTION CLASS OF CASE	IP21	IP21	IP21
FEEDING SPEED (M/MIN)	2.5-13	2.5-13	2.5-13
POST-FLOVE TIME (S)	1±0.5	1±0.5	1±0.5
DIAMETER OF COIL (MM)	270	270	270
WEIGHT (KG)	34	35	17.5
DIAMETER OF EARTH CABLE (MM2)	≥2.5	≥2.5	≥2.5
WELDING THICKNESS (MM)	≥0.8	≥0.8	≥0.8
DIAMETER OF WELDING WIRE	0.8/1.0	0.8/1.0	0.8/1.0

 

III.STANDARD ACCESSORY LIST&PICTURE

 

 

   1. A set of welding torch.

 

   2. A set of earth clamp with fast coupling device.

 

   3.Two meters of gas carrying hose with two clips.

 1.A set of welding torch.

 

 2. A set of earth clamp with fast coupling device.

 

 3.Ten meters of gas carrying hose with two clips.

 

 4.Ten meters of 7x1 control wire with 7 core-plug.

 

 5. Ten meters of welding cable with connectors.

 

 6. A set of wire feeder.

IV.CHARACTERISTIC

 

    1.Integrate wire feeder with power together.

 

    2.Easy operation, high speed in welding without any  interruption, high successfully Rate of arc-starting.

 

    3.Little splash, deep welding pool,beautiful welding seam, heat-proof and Spilt-proof.

 

    4.Suitable for mild steel, low carbon steel, alloy steel etc and suitable for welding the thin-palte(0.8MM).

WELDING MACHINE NBC 250 GAS PROTECTION