CUTTER(CUT 40 AIR PLASMA WELDER WITH CCC&CE APPROVED)

CUTTER(CUT 40 AIR PLASMA WELDER WITH CCC&CE APPROVED) Max.35mm Cutting Capacity,10-120Amp Arc Start:Contact (15-60A)/Uncontact

I. CUTTER(CUT 40 AIR PLASMA WELDER WITH CCC&CE APPROVED)     

   MODEL :CUT-30/40/60/70/100/120

II. MAIN TECHNICAL PARAMETER

	CUT-30	CUT-40	CUT-60	CUT-70	CUT-100	CUT-120
							Rated power input	220VAC(Single Phase)±10%,50/60 Hz		380VAC(3 Phase)±10%,50/60 Hz
Rated input power capacity  (KVA)	4	5	9	11	17	20
No-load voltage  (V)	230	230	236	240	270	270
Output current adjustment range (A)	15-30	20-40	20-60	20-70	20-100	20-120
Rated output voltage (V)	92	96	104	108	120	128
Rated duty cycle	60%	60%	60%	60%	60%	60%
No-load loss (W)	40	40	50	50	100	100
Efficiency %	85	85	85	85	0.93	0.93
Power factor (COSφ)	0.93	0.93	0.93	0.93	F	F
Arc-starting	Contact			Uncontact
Gas flow(m3/min)	0.17	0.17	0.25	0.25	0.36	0.36
Max cutting thickness (mm)	7	12	23	25	30	35
Weight (KG)	7.5	9	19	21	35	38
Measurement (mm)	371x155x295	371x155x295	480x205x357	540x215x360	560x335x420	560x335x420
Insulation class	F	F	F	F	F	F
Protection class	IP23	IP23	IP23	IP23	IP23	IP23

III. CHARACTERISTIC

  1. High cutting speed and low cost; Cutting speed is several times than traditional cutting machine   

  2. Strong cutting penetration, narrow and smooth, no necessary for re-processing.   

  3. Adopting contacting(CUT-30, 40 & 60) or uncontacting(CUT-70, 100 & 120) arc starting cutting technology. 

  4. Can cut many sort of metal such as stainless steel, copper, iron and aluminum etc .

IV. STANDARD ACCESSORY LIST

  1. A set of cutting torch

  2. A set of earth clamp with fast coupling device

  3. A set of gas regulator

  4. Two meters of gas carrying hose with two clips

CUTTER(CUT 40 AIR PLASMA WELDER WITH CCC&CE APPROVED)